• Galileo Fitness in-depth review
• Galileo Fitness image gallery
• Ask GALILEO FITNESS quotation
2009©vibrationtrainingPlate.com newplanet srl - All rights reserved.
Below the whole assembly sequence of the Galileo Fitness. The packaging.
The box: very resistant. This is how it was delivered from Germany to our headquarter here.
Don't use a cutter to open the box. You may damage the pole.
Take care of your back! The Galileo Fitness Base is very heavy. At least two strong guys to take it out.
These are all the pieces that comes with the Galileo Fitness Package.
Start mounting the handlebar pole. Pointing the screws is not really easy, you have to perfectly align the holes.
Firmly fasten the screws with the hexagonal Allen or Brugola key (Egidio Brugola is the inventor of the key).
Pole fixed.
Now unpack the control unit.
Prepare the 3 hexagon srews.
The control unit must plug with the connector.
Once placed in position point and fasten the screws.
Put the Base close to the handlebar base and prepare to lift and release over with care.
Simply align the Base, the bottom rubber supports will tie in with mill cuts on the aluminum bottom base.
Now take a closer look to the cable connector.
Position it.
Plug the connector.
Fasten it firmly.
The Galileo Fitness is ready. Opposite to the cable connector is the electricity plug. Insert the cable, turn on the switch.
Insert the key. Turn the key on Manual. Set time and frequency. Press START for one second and the Galileo fitness will run.
|
|