XG5 DKN assembly instructions
Assembly sequence of the XG5 vibration training Plate. Step by step instructions and suggestions by vibrationtrainingPlate.com
XG5 in-depth review • quotation XG5
[ in-depth review appendix by Marvin Sasha - 16th November 2008 ]
2008©vibrationtraining.com newplanet srl - All rights reserved.
XG5 assembly
XG5 comes in two boxes: base and accessories weight 58kg 128lbs. Central column 13kg 29lbs. Both can be turned upside down, pulled, dragged roughly that nothin happen. Very good packaging.
Open the column box, take it out an put on the ground. Open the other box and pull out the handlebar and manuals. Remove the polystyrene foam. To pull out the base you have to be in two. Ask for help to your neighbor. 50kg or 110lbs are a heavy load. Watch your back.
In the left above image there's all you get in the boxes. Now put something strong below the base and lift up the rear.
Prepare the screws and the washers as in the image above. The other 3 screws in the plastic bag are for the stabilizer you will fix later.
Put gently the column on the base. Connect the cables as in the pictures.
Fix the screws with the tool in the picture here on the right.
Fasten firmly the bottom base column screw. Then, prepare the screws for the handlebar and the control unit.
Place the handlebar and fix it with the four big screws.
Connect the cables and connect the mass cable to the column. 3 cables to connect.
Insert the control unit over the column and fasten gently the screws with a screwdriver (doesn't come with the XG5) and be careful to not fasten too strong for the panel is made of plastic.
Bend the XG5 to one side as in the image above and fix the stabilizer with the 3 remaining screws.
Remove all the protection films.
Now you can remove the orange box. Plug the electricity an power on the XG5 to try if everything works.
 |
price
|
home <<
in depth reviews
G Force test, acceleration, EMG electromiografy, noise, opinions and exclusive details of the major vibration training Plates.
Scientific Research
pubblications
All the affirmations in this site are taken from the scientific reserch collected in our research section.
Info and quotes
ask a suggestion
Actually the purchase of a Vibration Training Device is driven by the marketing and advertising. Don't buy the wrong device. We make tests and investigate for the pros and cons. Ask us first.
Beware fake Plates!
for beauty farms
DO NOT PURCHASE ANY DEVICE IF YOU NEVER TRY AT LEAST ONE OF THE FOLLOWING APPROVED Plates:
• GALILEO FITNESS
• MAXUVIBE MX7
• VIBROGYM
• POWERPLATE
• DKN XG10
THERE ARE MANY FAKE VIBRATION TRAINING Plates.
PLEASE ASK FOR A FREE SUGGESTION, THEN FEEL FREE TO BUY WHAT YOU LIKE MOST.
Fake Plates.
We are aware of many dealers selling Plates with very low performance, under the vibration training threshold at a scandalous professional price range.